Pumps

Single-stage centrifugal pumps are listed in two ranges :

1. HYGIENIC

CS, CSA, CSD, CSK & CR are equipped with its own bearing (IEC independent motorization) and pump body is cast (not in pressed polished plate). Reliability, Robustness, High efficiency, Low NPSH. 

CN, CL & CLC, are of conventional configuration.
Standardised mechanical seals EN 12756, ISO 3069 for all CSF pumps.                  

MKP-Bio, With REVERSE magnetic drive, 100% hermetic, drainable. EHEDG, 3A, FDA certified.

2. CHEMICAL : 

MKP, MKP-HT, MKTP : With REVERSE magnetic drive. Can accept up to 30% of particles smaller than 1 mm. Stainless steel 316L, 304L, Uranus B6, Hastelloy, Titanium, Nickel.                                                       

MKPL & MSKP : With magnetic coupling. PFA coated (up to 200°C) or solid PTFE.               

EB & ET : Double mechanical seal for charged liquids. PFA or Ceramic coated (corrosive and abrasive liquids).

300 m3/h – 100 mcl .
Options: Ra < 0.5 μm, Inducer, drain, certificates, Super Duplex or Nickel Steel
and special configurations on request.

300 m3/h – 100 mcl .
Options: Ra < 0.5 μm, Inducer, drain, certificates, Super Duplex or Nickel Steel
and special configurations on request.

150 m³/h – 20 mcl.
Pump with a special screw shaped impeller, which is ideal for the gentle handling of very delicate fluids and large soft solids in suspension.  Max. 1450 rpm. Special configurations on request.

• 570 m3/h – 100 mcl ;
• >30 Kw (lower powers available) ;
• With double oil-lubricated bearing ;
• Assembly with elastic coupling ;
• Special configurations on request.

• 60 m3/h – 80 mcl ;
• 100% Hermetic et drainable ;
• Ra < 0,8µm (0,4µm en option) ;
• Inox 316 – 1.4435 ;
• Certifications and special configurations on request.

• 75 m3/h – 60 mcl ;
• Ra < 0.8 μm ;
• Drain, 0.5 μm, certificates and special configurations on request.
• Hydraulics used for the construction of CNH self-priming pumps.

CL (open impeller) / CLC (closed impeller)
90 m3/h – 50 mcl. Ra < 0.8 μm.

• 1.300 m3/h – 145 mcl ;
• – 100 à + 250°C (HT :  + 350°C) ;
• Max. 30% solids < 1 mm ;
• DIN EN ISO 2858, 5199 et 15783 ;
• Full heating jacket and special configurations on request.

• 250 m3/h – 100 mcl ;
• – 20 à + 170°C ;
• Max. 30% solids < 1 mm ;
• Max. length : 4 m ;
• DIN EN ISO 5199 et 15783 ;
• special configurations on request.

• 400 m3/h – 90 mcl ;
• – 20 à + 200°C ;
• Max. 10% solids < 1 mm ;
• Vacuum resitant ; 
• DIN EN ISO 2858, 5199 and 15783 ; 
•  Special configurations on request.

• 140 m3/h – 90 mcl ;
• – 20 à + 150°C ;
• Max. 5% solids ;
• DIN EN ISO 2858, 5199 et 15783 ;
• Special configurations on request.

• 400 m3/h – 100 mcl ;
• – 20 à + 200°C ; 
• DIN EN ISO 2858 and 5199 ;
• Metallic impeller covered with PFA ;
• Special configurations on request.

• 300 m3/h – 70 mcl ;
• – 20 à + 150°C ;
• High abrasion/corrosion resistance ;
• DIN EN ISO 2858, 5199 and 15783 ;
• Special configurations on request.

The multi stage pumps CSM & CV are equipped with its own bearing (IEC independent motorization) and pump body is cast (not in pressed polished plate).
Mechanical seals are standardised to EN 12756, ISO 3069.

150 m³/h – 150 mcl – 40 bar. 1 to 4 stages. Open impeller. Special configurations on request.

40 m³/h – 140 mcl. 1 to 4 stages. Closed impeller. Horizontal or vertical version. Special configurations on request.

Two ranges:

1. Liquid ring :

HYGIENIC

• A (pump body is cast. Vertical inlet),
• AS (The pump body is cast and is equipped with its own bearing. Horizontal inlet),
• ASH in EHEDG and 3A version (The pump body is cast and is equipped with its own bearing. Vertical inlet)

CHEMICAL

• MSKS : Solid PTFE Magnetic Drive

2. Centrifugal :

HYGIENIC

• CNH with the possibility to drain the pump at a single point (UNIQUE).

CHEMICAL

• MKP-S (REVERSE Magnetic Drive) ; 
• MKPL-S (PFA Lined – Magnetic Drive)

Standard mechanical seals EN 12756, ISO 3069 for hygienic pumps.

• 50 m3/h – 35 mcl ;
• Pump body is cast ;
• Easy maintenance,
• opening the pump without
• having to disconnect
• it from the installation ;
• Large sizes with elastic coupling.

• 50 m3/h – 40 mcl ;
• The pump body is cast ; 
• Equipped with its own
• bearing and a front chamber ;
• Horizontal inlet ;
• Easy maintenance, opening by clamp ;
• Special configurations on request.

• 40 m3/h – 35 mcl ;
• The pump body is cast and is
• equipped with its own bearing ;
• Easy maintenance,
• opening by clamp ;
• Ra < 0,8 or 0,5 μm ;
• Certificates and drain in option ;
• Special configurations on request.

• 60 m3/h – 70 mcl ;
• Ra < 0.8 μm ;
• The only pump of this
• configuration on the market
• that can drain at a single point ;
• Ra <0.5 μm and certificates in option ;
• Special configurations on request.

• 80 m3/h – 60 mcl ;
• – 100 à + 250°C ;
• Max. 30% solids < 1 mm ;
• DIN EN ISO 2858, 5199 et 15783 ;
• Spécial configurations on request.

• 35 m3/h – 40 mcl ; 
• – 20 à + 150°C ;
• Max. 10% solids ;
• DIN EN ISO 2858, 5199 and 15783 ;
• Special configurations on request.

• 2,5 m3/h – 34 mcl ;
• – 20 à + 80 °C ;
• Impeller with metal core, PFA lined ;
• DIN EN ISO 2858, 5199 and 15783 ;
• Special configurations on request.

Peripheral pumps have been developed for applications with low flow rates and high heads as well as for pilot installations.

Two range :
HYGIENIC : The CSF CP pump with standard mechanical seals EN 12756, ISO 3069.
CHEMICALS : The MKPP and MSKPP pumps with magnetic drive.

• 6 m3/h – 100 mcl ;
• Special design of impeller ;
• Easy maintenance, opening of the pump
• by the cover without disconnection ;
• Special configuration on request.

• 4 m3/h – 40 mcl ;
• – 100 à+ 200°C ;
• DIN EN ISO 5199 et 15783 ;
• Clean product ; 
• Special configuration on request.

• 8 m3/h – 160 mcl ;
• – 20 à 100°C ;
• DIN EN ISO 5199 and 15783 ;
• Clean product ; 
• Special configuration on request.

A wide range of positive displacement pumps are available with CSF and OMAC :

• Lobe Pumps (OMAC) all possible configurations and materials. From the industrial version to the Super Clean (unique design on the market).
• Twin Screw Pumps : high-tech quality/hygiene design, wide viscosity range, delicate products, which may contain particles and air.
• Progressive Cavity Pumps : very wide range of materials and configurations to meet the majority of applications.
• Sinusoidal Pumps : the ideal pump for products sensitive to shear and foaming, which may contain delicate piece.
• Vertical Pneumatic Piston Pumps : simple and efficient design with good suction power. Much used for emptying drums/barrels, mobile tanks and ATEX applications.

Mechanical seals standardised to EN 12756, ISO 3069.

• 150 m³/h – 20 bar ;
• Ra < 0,8 µm ;
• The mechanical seal : balanced
• hygienic cartridges ;
• Molded body ;
• Assembly in groups with flexible coupling ;
• Special configurations on request.

• Two double roller bearings/shaft ;
• 1050 lit/100 rpm – 20 bar;
• Industrial or hygienic version.
• Available options :
  Rectangular inlet; Double jacket; Aseptic;
• By-pass; Titanium, Hastelloy, Monel;
• All types of lobes and seals ;
• Special configurations on request

• 600 L/100 rpm – 17 bar ;
• Body and fittings machined in one piece
• (no welding) ;
• Developed for easy maintenance and
• hygienic design.
• Options:
  Body in stainless steel 316 (1.4435) ;
  Bearing housing in stainless steel 304 ;
  Special configurations on request.

• Stainless steel circumferential pistons
  or Acteon;
• 155 lit/100 revolutions – 5 bar;
• Solid particles up to 19 mm;
• Different types of lobes and
• mechanical seals;
• Special configurations on request

• 155 lit/100 rpm – 20 bar; Fe < 3% ;
• Body and fittings machined in one
  part (no welding) ;
• Stainless steel bearing housing;
• SC (Super Clean) version: rotors and
• shafts are also machined in one piece
• (no seals or cavity for rotor mounting) ;
• Special configurations on request.

• 200m³/h – 24 bar ;
• Monobloc version or with bearing
• (double bearing & flexible coupling).
• Options :
  Crushing blades at pump outlet ;
  Mobile trolley;
  Control cabinet ;
  By-pass valve;
  dry-running and temperature protection;
• Special configurations on request.

Features an hoper and twoo pre-feeding screws (MC2), with a blade feeder (MC2R) ; 

Monobloc version or with bearing.
Options :
Crushing blades at pump outlet ;
Mobile trolley;
Control cabinet;
By-pass valve;
Dry running and temperature protection.

• Features a hopper and a pre-feeding screw ; 
• Monobloc version or with bearing
• (double bearing & flexible coupling).
• Options :
  Crushing blades at pump outlet ;
  Mobile trolley;
  Control cabinet ;
  By-pass valve;
  Dry-running and temperature protection;
• Special configurations on request.

• 20 m³/h – 12 bar ;
• Ideal for product discharge delicate in barrels or mobile containers.
• Options :
  Control cabinet ;
  Dry-running and temperature protection;
• Special configurations on request.

• Features a hopper, a pre-feeding
• screw and a vane crusher ;
• Monobloc version or with bearing
• (double bearing & flexible coupling).
• Options :
  Crushing blades at pump outlet ;
  Mobile trolley; Control cabinet ;
  By-pass valve;
  Dry-running and temperature protection;
• Special configurations on request.

• 200m³/h – 24 bar ;
• Robust construction and flanged connections ;
• Monobloc version or with bearing
• (double bearing & flexible coupling).
• Optionals :
  Mobile trolley ;
  Control cabinet ;
  By-pass valve;
  Dry-running and temperature protection;
• Special configurations on request.

• 100m³/h – 15 bar ;
• Ideal for sensitive products on the shear
• and emulsion formation;
• Configurations and materials depending
• on the application.

• 100 lit/min – 150 bar ;
• Only one seal;
• Available in short version (with
  or without scraping plate) or long ;
• ATEX;
• Special configurations on request.

• 55 lit/min – 24 bar ;
• Designed for lighter applications;
• Valves and sealing depending on the application and the product being pumped;
• ATEX.

• Manual or semi-automatic barrel emptying systems, mobile tanks or container ;
• Sraper plate, pneumatic lift, dual-articulation arm are available;
• Special configurations on request.